Zmodell ZM-INT-WU - Interior details for Württemberg design 2-axle passenger cars High-quality interior details insert for Württemberg design open platform 2-axle passenger cars.   Material: High-resolution SLA 3D-printed resin airbrushed with lacquer paint. Quantity: 1 piece Scale: Z scale 1:220 Suitable for: Märklin® 8103, 8700, 8701, 8739, 80634, 80911, 81390, 81420, 81563, 81845, 82101, 87001, 87002, 87003, 87009, 98031, 98181   Installation 1. Separate the chassis and the body of the passenger car: heat up the pins on the bottom side of the coupler box with a soldering iron heated to 200° C and carefully pull the body upwards at the same time. 2. Place the interior details insert onto the chassis. 3. Carefully install the body back onto the chassis. Couplers must be reassembled again. After this, melt the aforementioned pins with a soldering iron heated to 200° C again to secure the car body to the chassis.   Information: In some cases, SLA 3D-printed parts may show certain warping over time. It is not a fault, but a limitation of materials and manufacturing technology. To restore the original form of the part, heat it up with a hair dryer to 80-100° C max., carefully straighten it and let it cool completely, holding it in a straightened position while it cools.   Warnhinweis nach EU-Spielzeugrichtlinie 2009/48/EG: ACHTUNG: Nicht geeignet für Kinder unter 14 Jahren. Verletzungsgefahr und Erstickungsrisiko, wegen funktionsbedingter scharfer Ecken und Kanten, verschluckbarer Kleinteile. Verantwortlich im Sinne der Produktsicherheitsverordnung (GPSR) ist: HRT Informationstechnik GmbH, Kasseler Straße 7, DE-34431 Marsberg, Telefon: 0049 (0) 2994 / 9889 -60, E-Mail: info@hrt.de, Web: www.hrt.de 

Zmodell ZM-INT-APM - Interior details for SBB type APM panorama car   High-quality interior details insert for Swiss Federal Railways (SBB/CFF/FFS) express train type APM panorama car is designed with exceptional attention to details and features separately painted color elements.   Material: High-resolution SLA 3D-printed resin airbrushed with lacquer paint with separately painted elements. Quantity: 1 piece Scale: Z scale 1:220 Suitable for: Märklin® 81594, 87660, 87661, 87662, 87663   Installation 1. Carefully open the panorama car by separating the chassis and the body. 2. Install the interior details insert onto the chassis. Gently press on the part until it sits on the chassis completely. 3. Reassemble the panorama car by careful placing the body back onto the chassis.   Information: In some cases, the parts of the panorama car as well as interior details insert may show some warping over time. It is not a fault, but a limitation of materials and manufacturing technology. Due to this, small gaps may be visible between the chassis and the car body after installing the interior parts. In this case, it is recommended to secure the car body to the chassis with glue, wrap the car with rubber bands and leave it to dry for 24 hours.   Important: Use only non-destructive glues that are safe for plastic! For example, Faller® Expert Lasercut Art. No. 170494. Do not use glues for plastic as they may damage the model and paint! Warnhinweis nach EU-Spielzeugrichtlinie 2009/48/EG: ACHTUNG: Nicht geeignet für Kinder unter 14 Jahren. Verletzungsgefahr und Erstickungsrisiko, wegen funktionsbedingter scharfer Ecken und Kanten, verschluckbarer Kleinteile. Verantwortlich im Sinne der Produktsicherheitsverordnung (GPSR) ist: HRT Informationstechnik GmbH, Kasseler Straße 7, DE-34431 Marsberg, Telefon: 0049 (0) 2994 / 9889 -60, E-Mail: info@hrt.de, Web: www.hrt.de